SatPax® 670 pre-wetted wipers are made with a higher saturation level to support the critical solution contact time needed in the regulated industries. The wiper is pre-wetted with deionized water (DI H20) and EU Pharmacopoeia grade IPA or Ethanol. |
| |
Literature  |
| Product Information Sheet |
| Wiper Usage Poster |
| Material Safety Data Sheets |
| |
| Composition and Attributes |
|
55% cellulose/45% polyester, nonwoven
Peal and reseal pouches allow for single wiper use and prevent evaporation
Lot number on each pouch for traceability & process accountability
Low in particles and fibres
Eliminate squirt bottles and uncontrolled saturation levels
Reduce storage requirements and usage quantities
Higher saturataion level available - 670-R |
| |
| Applications |
|
Compatible with ISO Class 5 (Class 100) cleanroom applications and above
General purpose cleaning and surface preparation
Wipe down of articles in pass-through
Residue removal after detergent or disinfectant use |
| |
| Order Information |
| Product |
Item Number |
Solution
(IPA/DI H20) |
Size(in) |
Size(cm) |
Shts/Pk |
Pks/Cs |
| SatPax 670 |
SPX670.001.0909.12 |
70/30 |
9x9" |
23x23cm |
25 |
12 |
| SatPax 670 |
SPX670.001.0911.12 |
70/30 |
9x11" |
23x28cm |
50 |
12 |
| SatPax 670 |
SPX670.001.1212.12 |
70/30 |
12x12" |
30x30cm |
25 |
12 |
| SatPax 670 |
SPX670.003 |
50/50 |
9x23" |
23x58cm |
25 |
12 |
| Product |
Item Number |
Solution
(Eth/DI H20) |
Size(in) |
Size(cm) |
Shts/Pk |
Pks/Cs |
| SatPax 670 |
SPX670.011.0909.12 |
70/30 |
9x9" |
23x23cm |
25 |
12 |
| Product |
Item Number |
Solution
(IPA/DI H20) |
Size(in) |
Size(cm) |
Shts/Pk |
Pks/Cs |
| SatPax 670-R |
SPX670R.001.12 |
70/30 |
9x9" |
23x23cm |
75 |
12 |
|
